#
# ISC License
#
# Copyright (c) 2016, Autonomous Vehicle Systems Lab, University of Colorado at Boulder
#
# Permission to use, copy, modify, and/or distribute this software for any
# purpose with or without fee is hereby granted, provided that the above
# copyright notice and this permission notice appear in all copies.
#
# THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
# WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
# MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
# ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
# WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
# ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
# OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
#
#
# Unit Test Script
# Module Name: simplePowerSink
# Author: Andrew Harris
# Creation Date: July 17th 2019
#
import inspect
import os
import pytest
filename = inspect.getframeinfo(inspect.currentframe()).filename
path = os.path.dirname(os.path.abspath(filename))
bskName = 'Basilisk'
splitPath = path.split(bskName)
# Import all of the modules that we are going to be called in this simulation
from Basilisk.utilities import SimulationBaseClass
from Basilisk.utilities import unitTestSupport # general support file with common unit test functions
from Basilisk.simulation import simplePowerSink
from Basilisk.architecture import messaging
from Basilisk.utilities import macros
[docs]
@pytest.mark.parametrize("function", ["defaultPowerSink"
, "statusPowerSink"
])
def test_allTest_SimplePowerSink(show_plots, function):
"""Module Unit Test"""
[testResults, testMessage] = eval(function + '()')
assert testResults < 1, testMessage
[docs]
def defaultPowerSink():
"""Module Unit Test"""
testFailCount = 0 # zero unit test result counter
testMessages = [] # create empty array to store test log messages
unitTaskName = "unitTask" # arbitrary name (don't change)
unitProcessName = "TestProcess" # arbitrary name (don't change)
# Create a sim module as an empty container
unitTestSim = SimulationBaseClass.SimBaseClass()
# Create test thread
testProcessRate = macros.sec2nano(0.5) # update process rate update time
testProc = unitTestSim.CreateNewProcess(unitProcessName)
testProc.addTask(unitTestSim.CreateNewTask(unitTaskName, testProcessRate))
testModule = simplePowerSink.SimplePowerSink()
testModule.ModelTag = "powerSink"
testModule.nodePowerOut = 10. # Watts
unitTestSim.AddModelToTask(unitTaskName, testModule)
dataLog = testModule.nodePowerOutMsg.recorder()
unitTestSim.AddModelToTask(unitTaskName, dataLog)
unitTestSim.InitializeSimulation()
unitTestSim.ConfigureStopTime(macros.sec2nano(1.0)) # seconds to stop simulation
# Begin the simulation time run set above
unitTestSim.ExecuteSimulation()
# This pulls the actual data log from the simulation run.
drawData = dataLog.netPower
# compare the module results to the truth values
accuracy = 1e-16
truePower = 10.0 # Module should be off
testFailCount, testMessages = unitTestSupport.compareDoubleArray(
[truePower]*3, drawData, accuracy, "powerSinkOutput",
testFailCount, testMessages)
if testFailCount:
print("Failed test_default()")
else:
print("Passed")
# each test method requires a single assert method to be called
# this check below just makes sure no sub-test failures were found
return [testFailCount, ''.join(testMessages)]
[docs]
def statusPowerSink():
"""Module Unit Test"""
testFailCount = 0 # zero unit test result counter
testMessages = [] # create empty array to store test log messages
unitTaskName = "unitTask" # arbitrary name (don't change)
unitProcessName = "TestProcess" # arbitrary name (don't change)
unitTestSim = SimulationBaseClass.SimBaseClass()
# Create test thread
testProcessRate = macros.sec2nano(0.5) # update process rate update time
testProc = unitTestSim.CreateNewProcess(unitProcessName)
testProc.addTask(unitTestSim.CreateNewTask(unitTaskName, testProcessRate))
testModule = simplePowerSink.SimplePowerSink()
testModule.ModelTag = "powerSink"
testModule.nodePowerOut = 10. # Watts
unitTestSim.AddModelToTask(unitTaskName, testModule)
# create the input messages
powerStatusMsg = messaging.DeviceStatusMsgPayload() # Create a structure for the input message
powerStatusMsg.deviceStatus = 0
powerMsg = messaging.DeviceStatusMsg().write(powerStatusMsg)
testModule.nodeStatusInMsg.subscribeTo(powerMsg)
# Setup logging on the test module output message so that we get all the writes to it
dataLog = testModule.nodePowerOutMsg.recorder()
unitTestSim.AddModelToTask(unitTaskName, dataLog)
# Need to call the self-init and cross-init methods
unitTestSim.InitializeSimulation()
# Set the simulation time.
# NOTE: the total simulation time may be longer than this value. The
# simulation is stopped at the next logging event on or after the
# simulation end time.
unitTestSim.ConfigureStopTime(macros.sec2nano(1.0)) # seconds to stop simulation
# Begin the simulation time run set above
unitTestSim.ExecuteSimulation()
# This pulls the actual data log from the simulation run.
drawData = dataLog.netPower
# compare the module results to the truth values
accuracy = 1e-16
truePower = 0.0 # Module should be off
testFailCount, testMessages = unitTestSupport.compareDoubleArray(
[truePower]*3, drawData, accuracy, "powerSinkStatusTest",
testFailCount, testMessages)
if testFailCount:
print("Failed test_status()")
else:
print("Passed")
# each test method requires a single assert method to be called
# this check below just makes sure no sub-test failures were found
return [testFailCount, ''.join(testMessages)]
#
# This statement below ensures that the unitTestScript can be run as a
# stand-alone python script
#
if __name__ == "__main__":
test_allTest_SimplePowerSink()
# test_default()