#
# ISC License
#
# Copyright (c) 2023, Autonomous Vehicle Systems Lab, University of Colorado at Boulder
#
# Permission to use, copy, modify, and/or distribute this software for any
# purpose with or without fee is hereby granted, provided that the above
# copyright notice and this permission notice appear in all copies.
#
# THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
# WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
# MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
# ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
# WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
# ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
# OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
#
r"""
Overview
--------
This scenario demonstrates the use of the :ref:`sensorThermal` module, which models a sensor as a flat plate of solid
material with an insulated backing. An optional power input can be used if the sensor consumes power, which is transferred
to heat. The sensor radiates heat to the outside environment, and takes in heat from the sun based on its incidence
angle.
The script is found in the folder ``basilisk/examples`` and executed by using::
python3 scenarioSensorThermal.py
In this scenario, the :ref:`locationPointing`, :ref:`mrpFeedback`, and :ref:`extForceTorque` modules are used to
point the sensor. In the first orbital period, the sensor is pointed directly at the sun, heating it up. In the second
orbital period, the sensor is pointed opposite of the sun, cooling it.
Illustration of Simulation Results
----------------------------------
The illustration of these results may be found below, which show the temperature in celsius over the length of the
simulation.
::
show_plots = True
The following plots illustrate the temperature of the sensor.
.. image:: /_images/Scenarios/scenario_ThermalSensor.svg
:align: center
"""
#
# Basilisk Scenario Script and Integrated Test
#
# Purpose: The purpose of this scenario script is to demonstrate the use of the sensorThermal module, which models
# the temperature of a sensor.
# Author: Adam Herrmann
# Creation Date: December 13th, 2022
#
import os
import numpy as np
# import general simulation support files
from Basilisk.utilities import SimulationBaseClass
from Basilisk.utilities import (
unitTestSupport,
) # general support file with common unit test functions
import matplotlib.pyplot as plt
from Basilisk.utilities import macros
from Basilisk.utilities import orbitalMotion
# import simulation related support
from Basilisk.simulation import spacecraft
from Basilisk.simulation import extForceTorque
from Basilisk.utilities import simIncludeGravBody
from Basilisk.simulation import simpleNav
from Basilisk.simulation import ephemerisConverter
from Basilisk.simulation import sensorThermal
# import FSW Algorithm related support
from Basilisk.fswAlgorithms import mrpFeedback
from Basilisk.fswAlgorithms import locationPointing
# import message declarations
from Basilisk.architecture import messaging
# attempt to import vizard
from Basilisk.utilities import vizSupport
# The path to the location of Basilisk
# Used to get the location of supporting data.
from Basilisk import __path__
bskPath = __path__[0]
fileName = os.path.basename(os.path.splitext(__file__)[0])
[docs]def run(show_plots):
"""
The scenarios can be run with the followings setups parameters:
Args:
show_plots (bool): Determines if the script should display plots
"""
# Create simulation variable names
simTaskName = "simTask"
simProcessName = "simProcess"
# Create a sim module as an empty container
scSim = SimulationBaseClass.SimBaseClass()
# Set the simulation time variable used later on
simulationTime = macros.min2nano(20.0)
# Create the simulation process
dynProcess = scSim.CreateNewProcess(simProcessName)
# create the dynamics task and specify the integration update time
simulationTimeStep = macros.sec2nano(1.0)
dynProcess.addTask(scSim.CreateNewTask(simTaskName, simulationTimeStep))
# initialize spacecraft object and set properties
scObject = spacecraft.Spacecraft()
scObject.ModelTag = "bsk-Sat"
# Define the simulation inertia
I = [900.0, 0.0, 0.0, 0.0, 800.0, 0.0, 0.0, 0.0, 600.0]
scObject.hub.mHub = 750.0 # kg - spacecraft mass
scObject.hub.r_BcB_B = [
[0.0],
[0.0],
[0.0],
] # m - position vector of body-fixed point B relative to CM
scObject.hub.IHubPntBc_B = unitTestSupport.np2EigenMatrix3d(I)
# Add spacecraft object to the simulation process
scSim.AddModelToTask(simTaskName, scObject)
# Create the gravFactory
gravFactory = simIncludeGravBody.gravBodyFactory()
# Create the sun
gravFactory.createSun()
# Set up Earth Gravity Body
earth = gravFactory.createEarth()
earth.isCentralBody = True # ensure this is the central gravitational body
mu = earth.mu
# Attach gravity model to spacecraft
gravFactory.addBodiesTo(scObject)
# Create the spice interface
spiceObject = gravFactory.createSpiceInterface(
time="2021 MAY 04 07:47:48.965 (UTC)"
)
scSim.AddModelToTask(simTaskName, spiceObject)
# Set up the orbit using classical orbit elements
oe = orbitalMotion.ClassicElements()
oe.a = (6378 + 600) * 1000.0 # meters
oe.e = 0.01
oe.i = 63.3 * macros.D2R
oe.Omega = 88.2 * macros.D2R
oe.omega = 347.8 * macros.D2R
oe.f = 135.3 * macros.D2R
rN, vN = orbitalMotion.elem2rv(mu, oe)
n = np.sqrt(mu / oe.a / oe.a / oe.a)
P = 2.0 * np.pi / n
scObject.hub.r_CN_NInit = rN # m - r_CN_N
scObject.hub.v_CN_NInit = vN # m/s - v_CN_N
scObject.hub.sigma_BNInit = [[0.1], [0.2], [-0.3]] # sigma_BN_B
scObject.hub.omega_BN_BInit = [[0.001], [-0.01], [0.03]] # rad/s - omega_BN_B
# Set up extForceTorque module
extFTObject = extForceTorque.ExtForceTorque()
extFTObject.ModelTag = "externalDisturbance"
scObject.addDynamicEffector(extFTObject)
scSim.AddModelToTask(simTaskName, extFTObject, 97)
# Add the simple Navigation sensor module. This sets the SC attitude, rate, position
sNavObject = simpleNav.SimpleNav()
sNavObject.ModelTag = "SimpleNavigation"
scSim.AddModelToTask(simTaskName, sNavObject, ModelPriority=101)
sNavObject.scStateInMsg.subscribeTo(scObject.scStateOutMsg)
# Create the ephemeris converter
ephemConverter = ephemerisConverter.EphemerisConverter()
ephemConverter.ModelTag = "ephemConverter"
ephemConverter.addSpiceInputMsg(spiceObject.planetStateOutMsgs[0])
ephemConverter.addSpiceInputMsg(spiceObject.planetStateOutMsgs[1])
scSim.AddModelToTask(simTaskName, ephemConverter)
# Set up sun pointing guidance module
locPoint = locationPointing.locationPointing()
locPoint.ModelTag = "locPoint"
scSim.AddModelToTask(simTaskName, locPoint, 99)
locPoint.pHat_B = [0, 0, 1]
locPoint.scAttInMsg.subscribeTo(sNavObject.attOutMsg)
locPoint.scTransInMsg.subscribeTo(sNavObject.transOutMsg)
locPoint.celBodyInMsg.subscribeTo(ephemConverter.ephemOutMsgs[0])
# Set up the MRP Feedback control module
mrpControl = mrpFeedback.mrpFeedback()
mrpControl.ModelTag = "mrpFeedback"
scSim.AddModelToTask(simTaskName, mrpControl, 98)
mrpControl.guidInMsg.subscribeTo(locPoint.attGuidOutMsg)
mrpControl.K = 5.5
mrpControl.Ki = -1 # make value negative to turn off integral feedback
mrpControl.P = 30.0
mrpControl.integralLimit = 2.0 / mrpControl.Ki * 0.1
# Connect torque command to external torque effector
extFTObject.cmdTorqueInMsg.subscribeTo(mrpControl.cmdTorqueOutMsg)
# Now add the thermal sensor module
thermalSensor = sensorThermal.SensorThermal()
thermalSensor.T_0 = 0 # Celsius
thermalSensor.nHat_B = [0, 0, 1]
thermalSensor.sensorArea = 1.0 # m^2
thermalSensor.sensorAbsorptivity = 0.25
thermalSensor.sensorEmissivity = 0.34
thermalSensor.sensorMass = 2.0 # kg
thermalSensor.sensorSpecificHeat = 890
thermalSensor.sensorPowerDraw = 30.0 # W
thermalSensor.sunInMsg.subscribeTo(spiceObject.planetStateOutMsgs[0])
thermalSensor.stateInMsg.subscribeTo(scObject.scStateOutMsg)
scSim.AddModelToTask(simTaskName, thermalSensor)
# Setup logging on the power system
tempLog = thermalSensor.temperatureOutMsg.recorder()
scSim.AddModelToTask(simTaskName, tempLog)
# Create the FSW vehicle configuration message
vehicleConfigOut = messaging.VehicleConfigMsgPayload()
vehicleConfigOut.ISCPntB_B = (
I # use the same inertia in the FSW algorithm as in the simulation
)
configDataMsg = messaging.VehicleConfigMsg().write(vehicleConfigOut)
mrpControl.vehConfigInMsg.subscribeTo(configDataMsg)
# Initialize the simulation
scSim.InitializeSimulation()
# Set the simulation time.
# NOTE: the total simulation time may be longer than this value. The
# simulation is stopped at the next logging event on or after the
# simulation end time.
scSim.ConfigureStopTime(macros.sec2nano(int(P))) # seconds to stop simulation
# Begin the simulation time run set above
scSim.ExecuteSimulation()
# Change the location pointing vector and run the sim for another period
locPoint.pHat_B = [0, 0, -1]
scSim.ConfigureStopTime(macros.sec2nano(int(2 * P))) # seconds to stop simulation
scSim.ExecuteSimulation()
# Pull the temperature data
tempData = tempLog.temperature
tvec = tempLog.times()
tvec = tvec * macros.NANO2HOUR
# Plot the power states
figureList = {}
plt.close("all") # clears out plots from earlier test runs
plt.figure(1)
plt.plot(tvec * 60.0, tempData)
plt.xlabel("Time (min)")
plt.ylabel("Temperature (deg C)")
plt.grid(True)
pltName = "scenario_thermalSensor"
figureList[pltName] = plt.figure(1)
if show_plots:
plt.show()
plt.close("all")
return figureList
# This statement below ensures that the unitTestScript can be run as a
# stand-alone python script
#
if __name__ == "__main__":
run(True) # show_plots