# ISC License
#
# Copyright (c) 2016-2018, Autonomous Vehicle Systems Lab, University of Colorado at Boulder
#
# Permission to use, copy, modify, and/or distribute this software for any
# purpose with or without fee is hereby granted, provided that the above
# copyright notice and this permission notice appear in all copies.
#
# THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
# WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
# MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
# ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
# WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
# ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
# OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
import numpy as np
from Basilisk.architecture import messaging
from Basilisk.fswAlgorithms import pixelLineBiasUKF # import the module that is to be tested
from Basilisk.utilities import RigidBodyKinematics as rbk
from Basilisk.utilities import SimulationBaseClass, macros, orbitalMotion
import pixelLineBias_test_utilities as FilterPlots
def addTimeColumn(time, data):
return np.transpose(np.vstack([[time], np.transpose(data)]))
def rk4(f, t, x0):
x = np.zeros([len(t),len(x0)+1])
h = (t[len(t)-1] - t[0])/len(t)
x[0,0] = t[0]
x[0,1:] = x0
for i in range(len(t)-1):
h = t[i+1] - t[i]
x[i,0] = t[i]
k1 = h * f(t[i], x[i,1:])
k2 = h * f(t[i] + 0.5 * h, x[i,1:] + 0.5 * k1)
k3 = h * f(t[i] + 0.5 * h, x[i,1:] + 0.5 * k2)
k4 = h * f(t[i] + h, x[i,1:] + k3)
x[i+1,1:] = x[i,1:] + (k1 + 2.*k2 + 2.*k3 + k4) / 6.
x[i+1,0] = t[i+1]
return x
def twoBodyGrav(t, x, mu = 42828.314*1E9):
dxdt = np.zeros(np.shape(x))
dxdt[0:3] = x[3:6]
dxdt[3:6] = -mu/np.linalg.norm(x[0:3])**3.*x[0:3]
return dxdt
def setupFilterData(filterObject):
filterObject.planetIdInit = 2
filterObject.alpha = 0.02
filterObject.beta = 2.0
filterObject.kappa = 0.0
filterObject.gamma = 0.9
mu = 42828.314*1E9 #m^3/s^2
elementsInit = orbitalMotion.ClassicElements()
elementsInit.a = 8000*1E3 #m
elementsInit.e = 0.2
elementsInit.i = 10
elementsInit.Omega = 0.001
elementsInit.omega = 0.01
elementsInit.f = 0.1
r, v = orbitalMotion.elem2rv(mu, elementsInit)
bias = [1,1,-2]
filterObject.stateInit = r.tolist() + v.tolist() + bias
filterObject.covarInit = [1000.*1E6, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0,
0.0, 1000.*1E6, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0,
0.0, 0.0, 1000.*1E6, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0,
0.0, 0.0, 0.0, 5*1E6, 0.0, 0.0, 0.0, 0.0, 0.0,
0.0, 0.0, 0.0, 0.0, 5*1E6, 0.0, 0.0, 0.0, 0.0,
0.0, 0.0, 0.0, 0.0, 0.0, 5*1E6, 0.0, 0.0, 0.0,
0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 2.0, 0.0, 0.0,
0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 2.0, 0.0,
0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 3.0,]
qNoiseIn = np.identity(9)
qNoiseIn[0:3, 0:3] = qNoiseIn[0:3, 0:3]*0.00001*0.00001*1E-6
qNoiseIn[3:6, 3:6] = qNoiseIn[3:6, 3:6]*0.0001*0.0001*1E-6
qNoiseIn[6:9, 6:9] = qNoiseIn[3:6, 3:6]*0.0001*0.0001
filterObject.qNoise = qNoiseIn.reshape(9*9).tolist()
# uncomment this line is this test is to be skipped in the global unit test run, adjust message as needed
# @pytest.mark.skipif(conditionstring)
# uncomment this line if this test has an expected failure, adjust message as needed
# @pytest.mark.xfail() # need to update how the RW states are defined
# provide a unique test method name, starting with test_
[docs]def test_methods_kf(show_plots):
"""Module Unit Test"""
[testResults, testMessage] = relOD_method_test(show_plots)
assert testResults < 1, testMessage
[docs]def test_propagation_kf(show_plots):
"""Module Unit Test"""
[testResults, testMessage] = StatePropRelOD(show_plots, 10.0)
assert testResults < 1, testMessage
def relOD_method_test(show_plots):
# The __tracebackhide__ setting influences pytest showing of tracebacks:
# the mrp_steering_tracking() function will not be shown unless the
# --fulltrace command line option is specified.
__tracebackhide__ = True
testFailCount = 0 # zero unit test result counter
testMessages = [] # create empty list to store test log messages
state = [250, 32000, 1000, 5, 3, 2, 1, 1, 1]
covar = 10* np.eye(len(state))
dt = 10
mu = 42828.314
# Measurement Model Test
data = pixelLineBiasUKF.PixelLineBiasUKFConfig()
msg = messaging.OpNavCirclesMsgPayload()
msg.circlesCenters = [100, 200]
msg.circlesRadii = [100]
msg.planetIds = [2]
data.circlesInBuffer = msg
data.planetId = 2
data.countHalfSPs = len(state)
data.numStates = len(state)
# Dynamics Model Test
data.planetId = 2
stateIn = pixelLineBiasUKF.new_doubleArray(len(state))
for i in range(len(state)):
pixelLineBiasUKF.doubleArray_setitem(stateIn, i, state[i])
pixelLineBiasUKF.relODStateProp(data, stateIn, dt)
propedState = []
for i in range(len(state)):
propedState.append(pixelLineBiasUKF.doubleArray_getitem(stateIn, i))
expected = rk4(twoBodyGrav, [0, dt], np.array(state)*1E3)
expected[:,1:]*=1E-3
if np.linalg.norm((np.array(propedState) - expected[-1,1:])/(expected[-1,1:])) > 1.0E-15:
testFailCount += 1
testMessages.append("State Prop Failure")
# Set up a measurement test
data = pixelLineBiasUKF.PixelLineBiasUKFConfig()
# Set up a circle input message
msg = messaging.OpNavCirclesMsgPayload()
msg.circlesCenters = [100, 200]
msg.circlesRadii = [100]
msg.planetIds = [2]
data.circlesInBuffer = msg
data.planetId = 2
data.countHalfSPs = len(state)
data.numStates = len(state)
# Set up attitud message
att = messaging.NavAttMsgPayload()
att.sigma_BN = [0, 0.2,-0.1]
att.omega_BN_B = [0.,0.,0.]
data.attInfo = att
# Set up a camera message
cam = messaging.CameraConfigMsgPayload()
cam.sigma_CB = [-0.2, 0., 0.3]
cam.fieldOfView = 2.0 * np.arctan(10*1e-3 / 2.0 / (1.*1e-3) ) # 2*arctan(s/2 / f)
cam.resolution = [512, 512]
data.cameraSpecs = cam
# Populate sigma points
SP = np.zeros([len(state), 2*len(state) +1])
for i in range(2*len(state) + 1):
if i ==0:
SP[:, i] = np.array(state)
if i < len(state) + 1 and i>0:
SP[:,i] = np.array(state) + covar[:,i-1]
if i > len(state):
SP[:,i] = np.array(state) - covar[:,i-(len(state)+1)]
data.SP = np.transpose(SP).flatten().tolist()
data.state = state
pixelLineBiasUKF.pixelLineBiasUKFMeasModel(data)
yMeasOut = data.yMeas
expectedMeas = np.zeros([6, 2*len(state)+1])
dcm_CB = rbk.MRP2C(cam.sigma_CB)
dcm_BN = rbk.MRP2C(att.sigma_BN)
dcm_CN = np.dot(dcm_CB, dcm_BN)
pX = 2. * np.tan(cam.fieldOfView * cam.resolution[0] / cam.resolution[1] / 2.0)
pY = 2. * np.tan(cam.fieldOfView / 2.0)
X = pX / cam.resolution[0]
Y = pY / cam.resolution[1]
planetRad = 3396.19
obs = np.array([msg.circlesCenters[0], msg.circlesCenters[1], msg.circlesRadii[0], 0, 0, 0])
for i in range(2*len(state)+1):
r_C = np.dot(dcm_CN, SP[0:3,i])
rNorm = np.linalg.norm(SP[0:3,i])
r_C = -1./r_C[2]*r_C
centerX = r_C[0] / X
centerY = r_C[1] / Y
centerX += cam.resolution[0]/2 - 0.5
centerY += cam.resolution[1] / 2 - 0.5
rad = 1.0/X*np.tan(np.arcsin(planetRad/rNorm))
if i == 0:
obs[3:5] = np.array(msg.circlesCenters[0:2]) - obs[0:2]
obs[5] = rad - obs[2]
for j in range(3):
obs[3+j] = round(obs[3+j])
expectedMeas[0,i] = centerX - SP[6, i]
expectedMeas[1,i] = centerY - SP[7, i]
expectedMeas[2, i] = rad - SP[8, i]
expectedMeas[3:, i] = SP[6:, i]
yMeasTest = np.zeros([6, 2*len(state)+1])
for i in range(2*len(state)+1):
yMeasTest[:,i] = yMeasOut[i*6:i*6+6]
if np.linalg.norm((yMeasTest - expectedMeas))/np.linalg.norm(expectedMeas[:,0]) > 1.0E-15:
testFailCount += 1
testMessages.append("State Prop Failure")
if testFailCount == 0:
print("PASSED: ")
else:
print(testMessages)
return [testFailCount, ''.join(testMessages)]
def StatePropRelOD(show_plots, dt):
# The __tracebackhide__ setting influences pytest showing of tracebacks:
# the mrp_steering_tracking() function will not be shown unless the
# --fulltrace command line option is specified.
__tracebackhide__ = True
testFailCount = 0 # zero unit test result counter
testMessages = [] # create empty list to store test log messages
unitTaskName = "unitTask" # arbitrary name (don't change)
unitProcessName = "TestProcess" # arbitrary name (don't change)
# Create a sim module as an empty container
unitTestSim = SimulationBaseClass.SimBaseClass()
# Create test thread
state = [250, 32000, 1000, 5, 3, 2, 1, 1, 1]
testProcessRate = macros.sec2nano(dt) # update process rate update time
testProc = unitTestSim.CreateNewProcess(unitProcessName)
testProc.addTask(unitTestSim.CreateNewTask(unitTaskName, testProcessRate))
# Construct algorithm and associated C++ container
module = pixelLineBiasUKF.pixelLineBiasUKF()
module.ModelTag = "relodSuKF"
# Add test module to runtime call list
unitTestSim.AddModelToTask(unitTaskName, module)
setupFilterData(module)
# Create the input messages.
inputCamera = messaging.CameraConfigMsgPayload()
inputAtt = messaging.NavAttMsgPayload()
# Set camera
inputCamera.fieldOfView = 2.0 * np.arctan(10*1e-3 / 2.0 / 0.01) # 2*arctan(s/2 / f)
inputCamera.resolution = [512, 512]
inputCamera.sigma_CB = [1., 0.3, 0.1]
camInMsg = messaging.CameraConfigMsg().write(inputCamera)
module.cameraConfigInMsg.subscribeTo(camInMsg)
# Set attitude
inputAtt.sigma_BN = [0.6, 1., 0.1]
attInMsg = messaging.NavAttMsg().write(inputAtt)
module.attInMsg.subscribeTo(attInMsg)
circlesInMsg = messaging.OpNavCirclesMsg()
module.circlesInMsg.subscribeTo(circlesInMsg)
dataLog = module.filtDataOutMsg.recorder()
unitTestSim.AddModelToTask(unitTaskName, dataLog)
timeSim = 60
unitTestSim.InitializeSimulation()
unitTestSim.ConfigureStopTime(macros.min2nano(timeSim))
unitTestSim.ExecuteSimulation()
time = np.linspace(0, timeSim*60, (int) (timeSim*60/dt+1))
dydt = np.zeros(len(module.stateInit))
energy = np.zeros(len(time))
expected=np.zeros([len(time), len(module.stateInit)+1])
expected[0,1:] = module.stateInit
mu = 42828.314*1E9
energy[0] = -mu/(2*orbitalMotion.rv2elem(mu, expected[0,1:4], expected[0,4:7]).a)
expected = rk4(twoBodyGrav, time, module.stateInit)
for i in range(1, len(time)):
energy[i] = - mu / (2 * orbitalMotion.rv2elem(mu, expected[i, 1:4], expected[i, 4:7]).a)
stateLog = addTimeColumn(dataLog.times(), dataLog.state)
covarLog = addTimeColumn(dataLog.times(), dataLog.covar)
diff = np.copy(stateLog)
diff[:,1:]-=expected[:,1:]
FilterPlots.plot_TwoOrbits(expected[:,0:4], stateLog[:,0:4])
FilterPlots.EnergyPlot(time, energy, 'Prop', show_plots)
FilterPlots.StateCovarPlot(stateLog, covarLog, 'Prop', show_plots)
FilterPlots.StatePlot(diff, 'Prop', show_plots)
if (np.linalg.norm(diff[-1,1:]/expected[-1,1:]) > 1.0E-10):
testFailCount += 1
testMessages.append("State propagation failure")
if (energy[0] - energy[-1])/energy[0] > 1.0E-10:
testFailCount += 1
testMessages.append("State propagation failure")
# print out success message if no error were found
if testFailCount == 0:
print("PASSED: " + module.ModelTag + " state propagation")
else:
print(testMessages)
# return fail count and join into a single string all messages in the list
# testMessage
return [testFailCount, ''.join(testMessages)]
if __name__ == "__main__":
# relOD_method_test(True)
StatePropRelOD(True, 1.0)