#
# Unit Test Script
# Module Name: dvGuidance
# Creation Date: October 5, 2018
#
from Basilisk.utilities import SimulationBaseClass
from Basilisk.utilities import unitTestSupport # general support file with common unit test functions
from Basilisk.utilities import macros
from Basilisk.fswAlgorithms import dvGuidance
from Basilisk.fswAlgorithms import fswMessages
import matplotlib.pyplot as plt
import os, inspect
filename = inspect.getframeinfo(inspect.currentframe()).filename
path = os.path.dirname(os.path.abspath(filename))
[docs]def test_dv_guidance(show_plots):
""" Test dvGuidance. """
[testResults, testMessage] = dvGuidanceTestFunction(show_plots)
assert testResults < 1, testMessage
[docs]def dvGuidanceTestFunction(show_plots):
""" Test the dvGuidance module. Setup a simulation, write a DvBurnCmdFswMsg, and confirm that dvGuidance outputs the
correct values. """
testFailCount = 0 # zero unit test result counter
testMessages = [] # create empty array to store test log messages
unitTaskName = "unitTask" # arbitrary name (don't change)
unitProcessName = "TestProcess" # arbitrary name (don't change)
# Create a sim module as an empty container
unitTestSim = SimulationBaseClass.SimBaseClass()
# This is needed if multiple unit test scripts are run
# This create a fresh and consistent simulation environment for each test run
# Create test thread
testProcessRate = macros.sec2nano(0.5) # update process rate update time
testProc = unitTestSim.CreateNewProcess(unitProcessName)
testProc.addTask(unitTestSim.CreateNewTask(unitTaskName, testProcessRate)) # Add a new task to the process
# Construct the dvGuidance module
moduleConfig = dvGuidance.dvGuidanceConfig() # Create a config struct
moduleConfig.outputDataName = "dv_guidance_output"
moduleConfig.inputBurnDataName = "input_burn_data"
# This calls the algContain to setup the selfInit, crossInit, and update
moduleWrap = unitTestSim.setModelDataWrap(moduleConfig)
moduleWrap.ModelTag = "dvGuidance"
# Add the module to the task
unitTestSim.AddModelToTask(unitTaskName, moduleWrap, moduleConfig)
# The dvGuidance module reads in from the dvBurnCmd, so create that message here
dvBurnCmdMsg = fswMessages.DvBurnCmdFswMsg()
# NOTE: This is nonsense. These are random numbers
dvBurnCmdMsg.dvInrtlCmd = [5, 5, 5]
dvBurnCmdMsg.dvRotVecUnit = [1, 0, 0]
dvBurnCmdMsg.dvRotVecMag = .5
dvBurnCmdMsg.burnStartTime = macros.sec2nano(0.5)
# Write this message
msgSize = dvBurnCmdMsg.getStructSize()
unitTestSim.TotalSim.CreateNewMessage(unitProcessName,
moduleConfig.inputBurnDataName,
msgSize,
2)
unitTestSim.TotalSim.WriteMessageData(moduleConfig.inputBurnDataName,
msgSize,
0,
dvBurnCmdMsg)
# Log the output message
# unitTestSim.TotalSim.logThisMessage(moduleConfig.outputDataName, testProcessRate)
unitTestSim.TotalSim.logThisMessage(moduleConfig.outputDataName, testProcessRate)
# Initialize the simulation
unitTestSim.InitializeSimulation()
# Step the simulation to 3*process rate so 4 total steps including zero
unitTestSim.ConfigureStopTime(macros.sec2nano(1.0)) # seconds to stop simulation
unitTestSim.ExecuteSimulation()
# Get the output from this simulation
moduleOutputName = 'dvAttGuidance'
outSigma = unitTestSim.pullMessageLogData(moduleConfig.outputDataName + '.' + 'sigma_RN', list(range(3)))
outOmega = unitTestSim.pullMessageLogData(moduleConfig.outputDataName + '.' + 'omega_RN_N', list(range(3)))
outDOmega = unitTestSim.pullMessageLogData(moduleConfig.outputDataName + '.' + 'domega_RN_N', list(range(3)))
# NOTE: these values are just from a previous run. These should be validated
trueSigma = [[5.69822629e-01, 1.99143700e-01, 2.72649472e-01],
[6.12361487e-01, 1.31298090e-01, 3.16981631e-01],
[6.50967464e-01, 5.62624705e-02, 3.61117890e-01]]
trueOmega = [[4.08248290e-01, -2.04124145e-01, -2.04124145e-01],
[4.08248290e-01, -2.04124145e-01, -2.04124145e-01],
[4.08248290e-01, -2.04124145e-01, -2.04124145e-01]]
trueDOmega =[[0.00000000e+00, 0.00000000e+00, 0.00000000e+00],
[0.00000000e+00, 0.00000000e+00, 0.00000000e+00],
[0.00000000e+00, 0.00000000e+00, 0.00000000e+00]]
accuracy = 1e-9
unitTestSupport.writeTeXSnippet("toleranceValue", str(accuracy), path)
for i in range(len(trueSigma)):
# check a vector values
if not unitTestSupport.isArrayEqual(outSigma[i], trueSigma[i], 3, accuracy):
testFailCount += 1
testMessages.append(
"FAILED: " + moduleWrap.ModelTag + " Module failed " + moduleOutputName + " unit test at t=" + str(
outSigma[i, 0] * macros.NANO2SEC) + "sec\n")
if not unitTestSupport.isArrayEqual(outOmega[i], trueOmega[i], 3, accuracy):
testFailCount += 1
testMessages.append(
"FAILED: " + moduleWrap.ModelTag + " Module failed " + moduleOutputName + " unit test at t=" + str(
outOmega[i, 0] * macros.NANO2SEC) + "sec\n")
if not unitTestSupport.isArrayEqual(outDOmega[i], trueDOmega[i], 3, accuracy):
testFailCount += 1
testMessages.append(
"FAILED: " + moduleWrap.ModelTag + " Module failed " + moduleOutputName + " unit test at t=" + str(
outDOmega[i, 0] * macros.NANO2SEC) + "sec\n")
# print(outSigma)
# print(outOmega)
# print(outDOmega)
plt.figure()
plt.plot(outSigma[:, 0] * macros.NANO2SEC, outSigma[:,1], label="Sigma 1")
plt.plot(outSigma[:, 0] * macros.NANO2SEC, outSigma[:, 2], label="Sigma 2")
plt.plot(outSigma[:, 0] * macros.NANO2SEC, outSigma[:, 3], label="Sigma 3")
plt.legend(loc='upper left')
plt.xlabel('Time [s]')
plt.ylabel('Sigma')
plt.figure()
plt.plot(outOmega[:, 0] * macros.NANO2SEC, outOmega[:, 1], label="Omega 1")
plt.plot(outOmega[:, 0] * macros.NANO2SEC, outOmega[:, 2], label="Omega 2")
plt.plot(outOmega[:, 0] * macros.NANO2SEC, outOmega[:, 3], label="Omega 3")
plt.legend(loc='upper left')
plt.xlabel('Time [s]')
plt.ylabel('Omega [rad/s]')
plt.figure()
plt.plot(outDOmega[:, 0] * macros.NANO2SEC, outDOmega[:, 1], label="DOmega 1")
plt.plot(outDOmega[:, 0] * macros.NANO2SEC, outDOmega[:, 2], label="DOmega 2")
plt.plot(outDOmega[:, 0] * macros.NANO2SEC, outDOmega[:, 3], label="DOmega 3")
plt.legend(loc='upper left')
plt.xlabel('Time [s]')
plt.ylabel('DOmega')
if show_plots:
plt.show()
snippentName = "passFail"
if testFailCount == 0:
colorText = 'ForestGreen'
print("PASSED: " + moduleWrap.ModelTag)
passedText = r'\textcolor{' + colorText + '}{' + "PASSED" + '}'
else:
colorText = 'Red'
print("Failed: " + moduleWrap.ModelTag)
passedText = r'\textcolor{' + colorText + '}{' + "Failed" + '}'
unitTestSupport.writeTeXSnippet(snippentName, passedText, path)
return [testFailCount, ''.join(testMessages)]
if __name__ == '__main__':
test_dv_guidance(show_plots=False)