Basilisk Known Issues

Upcoming Version 1.X.X

  • None

Version 1.6.0

  • None

Version 1.5.1

  • WINDOWS ONLY: Windows users cannot currently run pytest directly on Basilisk src/ directory (there will be non-resolved python path issues that will result in erroneous ImportErrors). Instead, to verify proper installation of Basilisk, windows users must enter the specific subdirectory they are attempting to test, only then to run pytest. This should result in appropriate behavior. Right now there is no known solution to this issue.

Version 1.5.0

  • WINDOWS ONLY: Windows users cannot currently run pytest directly on Basilisk src/ directory (there will be non-resolved python path issues that will result in erroneous ImportErrors). Instead, to verify proper installation of Basilisk, windows users must enter the specific subdirectory they are attempting to test, only then to run pytest. This should result in appropriate behavior. Right now there is no known solution to this issue.

  • Here the reaction wheel dynamics have been modified such that the RW state output message is no longer hard-coded to rw_config_0_data, etc. Rather, now the ModelTag string is pre-pended to make this output msg name unique with. Any scripts that is logging this RW state message will have to be updated. The reason for this change is to allow multiple spacecraft to have RW devices and unique RW state messages.

  • There was an issue doing a clean compile using Python 2 which is addressed in the next version

  • test_reactionWheelStateEffector_integrated didn’t run on Python 2, this is fixed in the next version.

Version 1.4.2

  • WINDOWS ONLY: Windows users cannot currently run pytest directly on Basilisk src/ directory (there will be non-resolved python path issues that will result in erroneous ImportErrors). Instead, to verify proper installation of Basilisk, windows users must enter the specific subdirectory they are attempting to test, only then to run pytest. This should result in appropriate behavior. Right now there is no known solution to this issue.

Version 1.4.1

  • WINDOWS ONLY: Windows users cannot currently run pytest directly on Basilisk src/ directory (there will be non-resolved python path issues that will result in erroneous ImportErrors). Instead, to verify proper installation of Basilisk, windows users must enter the specific subdirectory they are attempting to test, only then to run pytest. This should result in appropriate behavior. Right now there is no known solution to this issue.

  • We ran into issues compiling on Linux where libsodium and conan were not compiling properly This is fixed in the next point release.

Version 1.4.0

  • WINDOWS ONLY: Windows users cannot currently run pytest directly on Basilisk src/ directory (there will be non-resolved python path issues that will result in erroneous ImportErrors). Instead, to verify proper installation of Basilisk, windows users must enter the specific subdirectory they are attempting to test, only then to run pytest. This should result in appropriate behavior. Right now there is no known solution to this issue.

  • BSK_PRINT has been replaced within Basilisk modules using bskLogging (for C++) and _bskLog (for C).

  • WINDOWS ONLY: there appears to be an issue compiling vizInterface with the new bskLog method on Windows. We are working a point release that will fix this.

Version 1.3.2

  • WINDOWS ONLY: Windows users cannot currently run pytest directly on Basilisk src/ directory (there will be non-resolved python path issues that will result in erroneous ImportErrors). Instead, to verify proper installation of Basilisk, windows users must enter the specific subdirectory they are attempting to test, only then to run pytest. This should result in appropriate behavior. Right now there is no known solution to this issue.

Version 1.3.1

  • WINDOWS ONLY: Windows users cannot currently run pytest directly on Basilisk src/ directory (there will be non-resolved python path issues that will result in erroneous ImportErrors). Instead, to verify proper installation of Basilisk, windows users must enter the specific subdirectory they are attempting to test, only then to run pytest. This should result in appropriate behavior. Right now there is no known solution to this issue.

Version 1.3.0

  • WINDOWS ONLY: Windows users cannot currently run pytest directly on Basilisk src/ directory (there will be non-resolved python path issues that will result in erroneous ImportErrors). Instead, to verify proper installation of Basilisk, windows users must enter the specific subdirectory they are attempting to test, only then to run pytest. This should result in appropriate behavior. Right now there is no known solution to this issue.

Version 1.2.1

  • WINDOWS ONLY: Windows users cannot currently run pytest directly on Basilisk src/ directory (there will be non-resolved python path issues that will result in erroneous ImportErrors). Instead, to verify proper installation of Basilisk, windows users must enter the specific subdirectory they are attempting to test, only then to run pytest. This should result in appropriate behavior. Right now there is no known solution to this issue.

Version 1.2.0

  • WINDOWS ONLY: Windows users cannot currently run pytest directly on Basilisk src/ directory (there will be non-resolved python path issues that will result in erroneous ImportErrors). Instead, to verify proper installation of Basilisk, windows users must enter the specific subdirectory they are attempting to test, only then to run pytest. This should result in appropriate behavior. Right now there is no known solution to this issue.

  • The magnetometer unit tests don’t pass on all platforms. This is corrected in the next release.

Version 1.1.0

  • WINDOWS ONLY: Windows users cannot currently run pytest directly on Basilisk src/ directory (there will be non-resolved python path issues that will result in erroneous ImportErrors). Instead, to verify proper installation of Basilisk, windows users must enter the specific subdirectory they are attempting to test, only then to run pytest. This should result in appropriate behavior. Right now there is no known solution to this issue.

  • the unit tests of the magnetometer module don’t pass on all operating systems as the test tolerances are too tight. This is resolved in the next release.

Version 1.0.0

  • WINDOWS ONLY: Windows users cannot currently run pytest directly on Basilisk src/ directory (there will be non-resolved python path issues that will result in erroneous ImportErrors). Instead, to verify proper installation of Basilisk, windows users must enter the specific subdirectory they are attempting to test, only then to run pytest. This should result in appropriate behavior. Right now there is no known solution to this issue.

  • Swig version 4 was released over the summer. This version is not compatible with our current Basilisk software. Be sure to install swig version 3.0.12.

Version 0.9.0

  • WINDOWS ONLY: Windows users cannot currently run pytest directly on Basilisk src/ directory (there will be non-resolved python path issues that will result in erroneous ImportErrors). Instead, to verify proper installation of Basilisk, windows users must enter the specific subdirectory they are attempting to test, only then to run pytest. This should result in appropriate behavior. Right now there is no known solution to this issue.

  • Swig version 4 was released over the summer. This version is not compatible with our current Basilisk software. Be sure to install swig version 3.0.12.

Version 0.8.1

  • WINDOWS ONLY: Windows users cannot currently run pytest directly on Basilisk src/ directory (there will be non-resolved python path issues that will result in erroneous ImportErrors). Instead, to verify proper installation of Basilisk, windows users must enter the specific subdirectory they are attempting to test, only then to run pytest. This should result in appropriate behavior. Right now there is no known solution to this issue.

  • Swig version 4 was released over the summer. This version is not compatible with our current Basilisk software. Be sure to install swig version 3.0.12.

Version 0.8.0

  • WINDOWS ONLY: Windows users cannot currently run pytest directly on Basilisk src/ directory (there will be non-resolved python path issues that will result in erroneous ImportErrors). Instead, to verify proper installation of Basilisk, windows users must enter the specific subdirectory they are attempting to test, only then to run pytest. This should result in appropriate behavior. Right now there is no known solution to this issue.

  • Swig version 4 was released over the summer. This version is not compatible with our current Basilisk software. Be sure to install swig version 3.0.12.

Version 0.7.2

  • WINDOWS ONLY: Windows users cannot currently run pytest directly on Basilisk src/ directory (there will be non-resolved python path issues that will result in erroneous ImportErrors). Instead, to verify proper installation of Basilisk, windows users must enter the specific subdirectory they are attempting to test, only then to run pytest. This should result in appropriate behavior. Right now there is no known solution to this issue.

  • The python pandas package is now required to run BSK. The installation instructions have been updated to reflect this.

  • Swig version 4 was released over the summer. This version is not compatible with our current Basilisk software. Be sure to install swig version 3.0.12.

Version 0.7.1

  • WINDOWS ONLY: Windows users cannot currently run pytest directly on Basilisk src/ directory (there will be non-resolved python path issues that will result in erroneous ImportErrors). Instead, to verify proper installation of Basilisk, windows users must enter the specific subdirectory they are attempting to test, only then to run pytest. This should result in appropriate behavior. Right now there is no known solution to this issue.

  • The python pandas package is now required to run BSK. The installation instructions have been updated to reflect this.

Version 0.7.0

  • WINDOWS ONLY: Windows users cannot currently run pytest directly on Basilisk src/ directory (there will be non-resolved python path issues that will result in erroneous ImportErrors). Instead, to verify proper installation of Basilisk, windows users must enter the specific subdirectory they are attempting to test, only then to run pytest. This should result in appropriate behavior. Right now there is no known solution to this issue.

  • The python pandas package is now required to run BSK. The installation instructions have been updated to reflect this.

Version 0.6.2

  • WINDOWS ONLY: Windows users cannot currently run pytest directly on Basilisk src/ directory (there will be non-resolved python path issues that will result in erroneous ImportErrors). Instead, to verify proper installation of Basilisk, windows users must enter the specific subdirectory they are attempting to test, only then to run pytest. This should result in appropriate behavior. Right now there is no known solution to this issue.

  • The enableUnityViz python function how has different inputs. Earlier python scripts must be updated. See the scenarios for examples. The arguments are now provided as optional keywords.

Version 0.6.1

  • WINDOWS ONLY: Windows users cannot currently run pytest directly on Basilisk src/ directory (there will be non-resolved python path issues that will result in erroneous ImportErrors). Instead, to verify proper installation of Basilisk, windows users must enter the specific subdirectory they are attempting to test, only then to run pytest. This should result in appropriate behavior. Right now there is no known solution to this issue.

  • This version of Basilisk no longer support the ASIO module that communicated with the Qt-based visualization as the BOOST library has been removed. This visualization has been replaced with the new Vizard visualization.

  • The thrMomentumDumping now reads in a 2nd required input message to determine if a new dumping sequence is requested.

Version 0.6.0

  • WINDOWS ONLY: Windows users cannot currently run pytest directly on Basilisk src/ directory (there will be non-resolved python path issues that will result in erroneous ImportErrors). Instead, to verify proper installation of Basilisk, windows users must enter the specific subdirectory they are attempting to test, only then to run pytest. This should result in appropriate behavior. Right now there is no known solution to this issue.

Version 0.5.1

  • WINDOWS ONLY: Windows users cannot currently run pytest directly on Basilisk src/ directory (there will be non-resolved python path issues that will result in erroneous ImportErrors). Instead, to verify proper installation of Basilisk, windows users must enter the specific subdirectory they are attempting to test, only then to run pytest. This should result in appropriate behavior. Right now there is no known solution to this issue.

Version 0.5.0

  • WINDOWS ONLY: Windows users cannot currently run pytest directly on Basilisk src/ directory (there will be non-resolved python path issues that will result in erroneous ImportErrors). Instead, to verify proper installation of Basilisk, windows users must enter the specific subdirectory they are attempting to test, only then to run pytest. This should result in appropriate behavior. Right now there is no known solution to this issue.

  • the exponentialAtmosphere module has been replaced with a module based on the new atmospheric density base class. BSK simulations that used the older module must update to use the new module. The module unit test scripts illustrate how to use this module, and the module PDF documentation discusses this as well. The dragEffector integrated test is also updated to make use of the new module

  • The MRP_Feedback() has the control vector domega0 removed and keeps this term now as a permanent zero vector. Any code that was setting this needs to be updated to not set this parameter anymore.

Version 0.4.1

  • WINDOWS ONLY: Windows users cannot currently run pytest directly on Basilisk src/ directory (there will be non-resolved python path issues that will result in erroneous ImportErrors). Instead, to verify proper installation of Basilisk, windows users must enter the specific subdirectory they are attempting to test, only then to run pytest. This should result in appropriate behavior. Right now there is no known solution to this issue.

  • The numpy python package can’t be the current version 1.16.x as this causes some incompatibilities and massive amounts of depreciated warnings. These warnings are not related to BSK python code, but other support code. Thus, for now be sure to install version 1.15.14 of numpy.

Version 0.4.0

  • WINDOWS ONLY: Windows users cannot currently run pytest directly on Basilisk src/ directory (there will be non-resolved python path issues that will result in erroneous ImportErrors). Instead, to verify proper installation of Basilisk, windows users must enter the specific subdirectory they are attempting to test, only then to run pytest. This should result in appropriate behavior. Right now there is no known solution to this issue.

  • Version 4.x.x and higher of pytest works again with Basilisk. You are free to install the latest version of pytest.

  • As we are now using the conan package management system, you can’t double the the Cmake GUI application. Instead, you must either launch the Cmake GUI application from the command line, or run CMake from the command line directly. See the platform specific Basilisk installation instructions.

  • The numpy python package can’t be the current version 1.16.x as this causes some incompatibilities and massive amounts of depreciated warnings. These warnings are not related to BSK python code, but other support code. Thus, for now be sure to install version 1.15.14 of numpy.

Version 0.3.3

  • WINDOWS ONLY: Windows users cannot currently run pytest directly on Basilisk src/ directory (there will be non-resolved python path issues that will result in erroneous ImportErrors). Instead, to verify proper installation of Basilisk, windows users must enter the specific subdirectory they are attempting to test, only then to run pytest. This should result in appropriate behavior. Right now there is no known solution to this issue.

  • The latest version of pytest (version 3.7.1) has a conflict with the RadiationPressure module unit test. We are still investigating. In the meantime, using pytest version 3.6.1 is working correctly.